Heavy Duty Tank Weld Ferrule

Heavy Duty Tank Weld Ferrule – Stainless Steel – 14MPW

Price range: $19.90 through $248.15

  • Available in 316L
  • 3-A Sanitary Standard

Sanitary clamp ferrule used for welding to a tank.

Tri-Clamp Measurement Guide
SKU: 14MPW Categories: , ,
[tablink tab="faqs"]Tri-Clamp Measurement Guide[/tablink]
14MPW-Drawing.jpg
14MPW-Chart.jpg
Size (Tube OD) Part Number Dimensions
304L 316L A B C
1/2″ — 14MPW6-050 1.625 0.321 0.502
3/4″ — 14MPW6-075 1.626 0.574 0.750
1   “ — 14MPW6-100 1.625 0.870 1.160
1-1/2″ — 14MPW6-150 1.625 1.370 1.676
2   “ — 14MPW6-200 1.750 1.870 2.192
2-1/2″ — 14MPW6-250 1.750 2.370 2.708
3   “ — 14MPW6-300 1.813 2.870 3.224
4   “ — 14MPW6-400 2.125 3.834 4.256
6   “ — 14MPW6-600 2.500 5.758 6.192
Size (Tube OD)

1/2", 3/4", 1", 1-1/2", 2", 2-1/2", 3", 4", 6"

How to Size a Tri-Clover/Tri-Clamp Fitting.

Have you ever wondered how to choose the correct Tri-Clamp size? Or how to measure an existing Tri-Clamp fitting? 

The sizing is based on the outside diameter (OD) of the tube, not on the outside diameter (OD) of the flange.

 

Tri-Clamp-Diagram-2

For example:

  • If your tube OD measurement is 2 inches, then your Tri-Clamp size is 2”.
  • If your existing Tri-Clamp fitting’s flange measures approximately 2.5 inches OD (2.516”), then your Tri-Clamp size is 2”.

Consult the chart below for corresponding Size / Tube OD and Flange OD measurements.

Note:

  • Sizes ½” and ¾” have the same flange OD of approximately 1 inch (0.984”).
  • Sizes 1” and 1-1/2” have the same flange OD of approximately 2 inches (1.984”).

Tri-Clamp Fitting Size Chart.

Tri-Clamp Size / Tube OD Tri-Clamp Flange OD
1/2″ & 3/4″ 0.984″
1″ & 1-1/2″ 1.984″
2″ 2.516″
2.5″ 3.047″
3″ 3.579″
4″ 4.682″
6” 6.570”
8” 8.602”
10” 10.570”
12” 12.570”

 

You may also like…

Related products