BioPharm Tri-Clamp Eccentric Reducer

Tri-Clamp Eccentric Reducer – Stainless Steel – 3214MP

Price range: $35.30 through $1,635.45

  • Available in 304 and 316L
  • 3-A Sanitary Standard

Tri-Clamp Eccentric Reducers connect process lines of different diameters with the center lines being offset. Connection is secured via clamp.

Tri-Clamp Measurement Guide
Product Specifications
SKU: 3214MP Categories: , ,
Tri-Clamp Measurement Guide
3214MP-Drawing.jpg
3214MP-Chart-1.jpg
Size
(Tube OD)		 Part Number Dimensions
304L 316L A
3/4″ x 1/2″ — 3214MP6-075050 2.000
1″ x 1/2″ — 3214MP6-100050 3.000
1″ x 3/4″ — 3214MP6-100075 2.000
1-1/2″ x 1/2″ — 3214MP6-150050 5.000
1-1/2″ x 3/4″ — 3214MP6-150075 4.000
1-1/2″ x 1″ 3124MP4-150100 3214MP6-150100 3.000
2″ x 1/2″ 3214MP4-200050 3214MP6-200050 7.000
2″ x 3/4″ 3214MP4-200075 3214MP6-200075 6.000
2″ x 1″ 3214MP4-200100 3214MP6-200100 5.000
2″ x 1-1/2″ 3214MP4-200150 3214MP6-200150 3.000
2-1/2″ x 1-1/2″ 3214MP4-250150 3214MP6-250150 5.000
2-1/2″ x 2″ 3214MP4-250200 3214MP6-250200 3.000
3″ x 1″ 3214MP4-300100 3214MP6-300100 9.000
3″ x 1-1/2″ 3214MP4-300150 3214MP6-300150 7.000
3″ x 2″ 3214MP4-300200 3214MP6-300200 5.000
3″ x 2-1/2″ 3214MP4-300250 3214MP6-300250 3.000
4″ x 1″ 3214MP4-400100 3214MP6-400100 13.125
4″ x 1-1/2″ 3214MP4-400150 3214MP6-400150 11.125
4″ x 2″ 3214MP4-400200 3214MP6-400200 9.125
4″ x 2-1/2″ 3214MP4-400250 3214MP6-400250 7.125
4″ x 3″ 3214MP4-400300 3214MP6-400300 5.125
6″ x 2″ 3214MP4-600200 3214MP6-600200 6.875
6″ x 3″ 3214MP4-600300 3214MP6-600300 6.875
6″ x 4″ 3214MP4-600400 3214MP6-600400 7.000
8″ x 3″ 3214MP4-800300 3214MP6-800300 7.500
8″ x 4″ 3214MP4-800400 3214MP6-800400 7.500
8″ x 6″ 3214MP4-800600 3214MP6-800600 7.750
Grade

,

Size (Tube OD)

3/4" X 1/2", 1" x 1/2", 1" x 3/4", 1-1/2" x 1/2", 1-1/2" x 3/4", 1-1/2" x 1", 2" x 1", 2" x 1-1/2", 2-1/2" x 1-1/2", 2-1/2" x 2", 3"x 1", 3"x 1-1/2", 3" x 2", 3" x 2-1/2", 4" x 1", 4" x 1-1/2", 4" x 2", 4" x 2-1/2", 4" x 3", 6" x 2", 6" x 3", 6" x 4", 8" x 3", 8" x 4", 8" x 6", 10" x 8", 12" x 10"

How to Size a Tri-Clover/Tri-Clamp Fitting.

Have you ever wondered how to choose the correct Tri-Clamp size? Or how to measure an existing Tri-Clamp fitting? 

The sizing is based on the outside diameter (OD) of the tube, not on the outside diameter (OD) of the flange.

 

Tri-Clamp-Diagram-2

For example:

  • If your tube OD measurement is 2 inches, then your Tri-Clamp size is 2”.
  • If your existing Tri-Clamp fitting’s flange measures approximately 2.5 inches OD (2.516”), then your Tri-Clamp size is 2”.

Consult the chart below for corresponding Size / Tube OD and Flange OD measurements.

Note:

  • Sizes ½” and ¾” have the same flange OD of approximately 1 inch (0.984”).
  • Sizes 1” and 1-1/2” have the same flange OD of approximately 2 inches (1.984”).

Tri-Clamp Fitting Size Chart.

Tri-Clamp Size / Tube OD Tri-Clamp Flange OD
1/2″ & 3/4″ 0.984″
1″ & 1-1/2″ 1.984″
2″ 2.516″
2.5″ 3.047″
3″ 3.579″
4″ 4.682″
6” 6.570”
8” 8.602”
10” 10.570”
12” 12.570”

 

You may also like…