Tri-Clamp Thermometer Cap – Stainless Steel – 23BMP
Price range: $28.40 through $68.30
- Sanitary Stainless Tri-Clamp Thermometer Cap
- Available in 316L Stainless Steel
- Sanitary Grade (Minimum polish 32 RA)
- Ideal for Food & Beverage and Pharmaceutical Markets
- Stamped with Heat Lot Numbers
Sanitary Stainless Tri-Clamp Thermometer Cap – 316L Steel, 32 Ra Polish
Ensure precise temperature monitoring with our Sanitary Stainless Tri-Clamp Thermometer Cap, expertly crafted from durable 316L stainless steel. Designed to meet sanitary standards with a minimum polish of 32 Ra, it’s perfect for food & beverage and pharmaceutical applications. Each cap is stamped with heat lot numbers for full traceability and quality assurance. Tri-Clamp Measurement Guide
| Size (Tube OD) |
Part Number | Dimensions | ||||
| 304 | 316L | A | B | |||
| 1 “ | — | 23BMP6-100 | 0.625 | 1.984 | ||
| 1-1/2″ | — | 23BMP6-150 | 0.625 | 1.984 | ||
| 2 “ | — | 23BMP6-200 | 0.625 | 2.516 | ||
| 2-1/2″ | — | 23BMP6-250 | 0.625 | 3.047 | ||
| 3 “ | — | 23BMP6-300 | 0.625 | 3.579 | ||
| 4 “ | — | 23BMP6-400 | 0.625 | 4.682 | ||
| Size (Tube OD x NPT) | 1" x 1/8", 1" x 1/4", 1" x 1/2", 1-1/2" x 1/8", 1-1/2" x 1/4", 1-1/2" x 1/2", 1-1/2" x 3/4", 2" x 1/8", 2" x 1/4", 2" x 1/2", 2" x 3/4", 2" x 1", 2-1/2" x 1/8", 2-1/2" x 1/4", 2-1/2" x 1/2", 2-1/2" x 3/4", 2-1/2" x 1-1/2", 2-1/2" x 1", 2-1/2" x 1-1/4", 3" x 1/8", 3" x 1/4", 3" x 1/2", 3" x 3/4", 3" x 1", 3" x 1-1/4", 3" x 1-1/2", 3" x 2" |
|---|
How to Size a Tri-Clover/Tri-Clamp Fitting.
Have you ever wondered how to choose the correct Tri-Clamp size? Or how to measure an existing Tri-Clamp fitting?
The sizing is based on the outside diameter (OD) of the tube, not on the outside diameter (OD) of the flange.
For example:
- If your tube OD measurement is 2 inches, then your Tri-Clamp size is 2”.
- If your existing Tri-Clamp fitting’s flange measures approximately 2.5 inches OD (2.516”), then your Tri-Clamp size is 2”.
Consult the chart below for corresponding Size / Tube OD and Flange OD measurements.
Note:
- Sizes ½” and ¾” have the same flange OD of approximately 1 inch (0.984”).
- Sizes 1” and 1-1/2” have the same flange OD of approximately 2 inches (1.984”).
Tri-Clamp Fitting Size Chart.
| Tri-Clamp Size / Tube OD | Tri-Clamp Flange OD |
|---|---|
| 1/2″ & 3/4″ | 0.984″ |
| 1″ & 1-1/2″ | 1.984″ |
| 2″ | 2.516″ |
| 2.5″ | 3.047″ |
| 3″ | 3.579″ |
| 4″ | 4.682″ |
| 6” | 6.570” |
| 8” | 8.602” |
| 10” | 10.570” |
| 12” | 12.570” |
You may also like…
-
Tri-Clamp Gasket – GTC
Price range: $0.60 through $315.10Select options This product has multiple variants. The options may be chosen on the product page -
Single Pin Heavy Duty Tri-Clamp – Stainless Steel – 13MHHM
Price range: $5.90 through $111.85Select options This product has multiple variants. The options may be chosen on the product page
